Whirlpool Whirlpool WDT750SAKZ 24 in. Top Control Dishwasher F9E2 Error Fix: Diverter Motor Position Error

Error code F9E2 on the Whirlpool Whirlpool WDT750SAKZ 24 in. Top Control Dishwasher means: Diverter Motor Position Error. The diverter motor has moved but the position sensor does not detect the expected position. The diverter may be stuck between positions. This can be caused by food debris jamming the valve, a worn position sensor, or a stripped gear in the motor. Clean around the diverter valve and try a reset. Replace the diverter motor if the issue persists.

The most successful fix is "Replace the Diverter Motor Assembly" (hard difficulty, ~60 minutes). Estimated DIY cost: $50-$90. HomeMD has 2 community-ranked fixes for this error.

This error is rated warning severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Replace the Diverter Motor Assembly") is rated hard difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Needle-nose pliers, Multimeter.

DIY cost: $50-$90. Professional repair typically costs $200-$300. Many homeowners save money by trying the top-ranked community fix first.

The Whirlpool Whirlpool WDT750SAKZ 24 in. Top Control Dishwasher has 8 other known error codes, including: F1E1 (Stuck Relay on Control Board), F1E2 (Control Board Memory Error), F2E1 (Stuck Button on User Interface), F2E2 (User Interface Board Communication Error), F3E1 (Wash Thermistor/Sensor Fault), and 3 more.

Error code F9E2 also appears on 1 other Whirlpool model: Whirlpool WDTA50SAKZ 47 dBA Top Control Dishwasher with 3rd Rack. The fix may vary by model, so check each model's specific page for tailored repair steps.