🍽️Dishwasher

E14

Viking · VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle

Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle E14 Error Fix: Timer or Cycle Controller Failure

The dishwasher's timer or cycle controller is malfunctioning, causing interrupted or incomplete cycles. This failure often results from a faulty timer motor or circuit board.

High severity2 fixes available✨ Free fix available

Quick Answer

Error E14 on the Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle means: Timer or Cycle Controller Failure. The top-ranked community fix is “Replace Timer or Cycle Controller” (hard difficulty, ~75 min, DIY cost: $120-$180). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · dishwasher

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

Root Cause Analysis

Control Board FailurePrimary

When to Call a Professional

While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:

This is a high severity error — continued use may cause damage or a safety hazard
The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $280-$400.

Other Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle Error Codes

Water Fill Timeout

2 fixes

E10

Overflow Protection Activated

2 fixes

E11

Drain Hose Kink Detected

2 fixes

E12

Water Level Sensor Failure

2 fixes

E13

Electrical Fault Detected

2 fixes

E15

High Temperature Limit Exceeded

Motor Failure

Door Switch Fault

People Also Ask About Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle Error E14

What does error code E14 mean on a Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle?

Error code E14 on the Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle means: Timer or Cycle Controller Failure. The dishwasher's timer or cycle controller is malfunctioning, causing interrupted or incomplete cycles. This failure often results from a faulty timer motor or circuit board.

How do I fix error code E14 on my Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle?

The most successful fix is "Replace Timer or Cycle Controller" (hard difficulty, ~75 minutes). Estimated DIY cost: $120-$180. HomeMD has 2 community-ranked fixes for this error.

Is error code E14 on a Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle serious?

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Can I fix Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle error E14 myself?

Yes — the top-ranked community fix ("Replace Timer or Cycle Controller") is rated hard difficulty and takes about 75 minutes. Tools needed: Phillips screwdriver.

How much does it cost to repair Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle error E14?

DIY cost: $120-$180. Professional repair typically costs $280-$400. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle have?

The Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle has 8 other known error codes, including: E1 (Water Fill Timeout), E10 (Overflow Protection Activated), E11 (Drain Hose Kink Detected), E12 (Water Level Sensor Failure), E13 (Electrical Fault Detected), and 3 more.

What other error codes does the Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle have?

The Viking VDW302SS 24 in 44 dBA 3-Stage Filtration Built-In Dishwasher with ProWash™ Cycle has 8 other known error codes:

E1 — Water Fill Timeout (2 fixes)
E10 — Overflow Protection Activated (2 fixes)
E11 — Drain Hose Kink Detected (2 fixes)
E12 — Water Level Sensor Failure (2 fixes)
E13 — Electrical Fault Detected (2 fixes)
E15 — High Temperature Limit Exceeded (2 fixes)
E16 — Motor Failure (2 fixes)
E17 — Door Switch Fault (2 fixes)

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx