Samsung Samsung WA50R5400AW 5.0 cu. ft. Top Load Washer LE1 Error Fix: Water Leak Detected at Bottom

Error code LE1 on the Samsung Samsung WA50R5400AW 5.0 cu. ft. Top Load Washer means: Water Leak Detected at Bottom. Water has been detected in the base pan of the washer. This specifically indicates a physical water leak rather than a sensor error. The leak may be from an internal hose connection, a cracked tub, a door boot tear, or the drain pump seal. Inspect all internal hoses and connections. The most common sources on Samsung washers are the tub-to-pump hose clamp and the door boot seal.

The most successful fix is "Replace the Drain Pump Seal and Inspect Door Boot Seal" (hard difficulty, ~90 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated critical severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Replace the Drain Pump Seal and Inspect Door Boot Seal") is rated hard difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Flathead screwdriver, Needle-nose pliers.

DIY cost: $15-$25. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Samsung Samsung WA50R5400AW 5.0 cu. ft. Top Load Washer has 8 other known error codes, including: 3C (Motor Current Error), 3E (Motor Error), 4E (Water Supply Error), 4E1 (Hot/Cold Water Lines Reversed), 5E (Drainage Error), and 3 more.

Error code LE1 also appears on 3 other Samsung models: Samsung DW80B7070US Smart 42 dBA Dishwasher, Samsung DW80R5060US StormWash 24 in. Dishwasher, Samsung WF45R6100AW 4.5 cu. ft. Front Load Washer. The fix may vary by model, so check each model's specific page for tailored repair steps.