Samsung Samsung WA50R5400AW 5.0 cu. ft. Top Load Washer LE Error Fix: Water Leak / Water Level Sensor Error

Error code LE on the Samsung Samsung WA50R5400AW 5.0 cu. ft. Top Load Washer means: Water Leak / Water Level Sensor Error. The washer has detected a water leak or the water level is dropping unexpectedly. On some Samsung models, LE is triggered by the leak sensor in the base pan detecting water. On other models, LE indicates the pressure switch (water level sensor) is not reading correctly. Check under the washer for water. Inspect the drain hose connection, tub-to-pump hose, and door boot seal for leaks. If no visible leak, clean the pressure switch air hose and pressure switch.

The most successful fix is "Replace the Leak Sensor or Pressure Switch to Fix Water Leak Detection Errors" (medium difficulty, ~60 minutes). Estimated DIY cost: $15-$30. HomeMD has 2 community-ranked fixes for this error.

This error is rated critical severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Replace the Leak Sensor or Pressure Switch to Fix Water Leak Detection Errors") is rated medium difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Phillips screwdriver, Multimeter.

DIY cost: $15-$30. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Samsung Samsung WA50R5400AW 5.0 cu. ft. Top Load Washer has 8 other known error codes, including: 3C (Motor Current Error), 3E (Motor Error), 4E (Water Supply Error), 4E1 (Hot/Cold Water Lines Reversed), 5E (Drainage Error), and 3 more.

Error code LE also appears on 3 other Samsung models: Samsung DW80B7070US Smart 42 dBA Dishwasher, Samsung DW80R5060US StormWash 24 in. Dishwasher, Samsung WF45R6100AW 4.5 cu. ft. Front Load Washer. The fix may vary by model, so check each model's specific page for tailored repair steps.