Samsung Samsung NX60A6511SS 6.0 cu. ft. Smart Freestanding Gas Range F-2 Error Fix: Oven Overheat — Heating Disabled

Error code F-2 on the Samsung Samsung NX60A6511SS 6.0 cu. ft. Smart Freestanding Gas Range means: Oven Overheat — Heating Disabled. The oven overheat protection has activated and disabled the heating elements. Similar to E-29 but may appear on different Samsung firmware versions. The oven has detected runaway heating or the sensor is reading an abnormally high temperature. Allow the oven to cool completely. Check the temperature sensor, heating elements, and control board relays. Do not use the oven until the cause is identified.

The most successful fix is "Test and Replace Temperature Sensor or Control Board Relays" (hard difficulty, ~90 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

This error is rated critical severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Test and Replace Temperature Sensor or Control Board Relays") is rated hard difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Multimeter.

DIY cost: $10-$20. Professional repair typically costs $250-$400. Many homeowners save money by trying the top-ranked community fix first.

The Samsung Samsung NX60A6511SS 6.0 cu. ft. Smart Freestanding Gas Range has 8 other known error codes, including: C-10 (Cooktop Burner Anomaly), C-21 (Self-Clean Over-Temperature), C-24 (Convection Fan Timeout), C-d0 (Main Board Communication Error), C-d1 (Sub-Board Communication Error), and 3 more.

Error code F-2 also appears on 1 other Samsung model: Samsung NE63A6511SS 6.3 cu. ft. Smart Freestanding Electric Range. The fix may vary by model, so check each model's specific page for tailored repair steps.