REAR LINK BLINK
Samsung TV & Audio · HW-Q990C 11.1.4 Channel 546 Watt Soundbar with Dolby Atmos, DTS:X, and Wireless Subwoofer
The wireless rear speakers (SWA-9500S satellites) have blinking blue LINK LEDs — they are not connected to the soundbar. Pairing procedure: (1) place rear speakers within 3 feet of soundbar, (2) unplug all three units (soundbar, subwoofer, rear speakers) for 30 seconds, (3) plug in rear speakers first — wait for blue LED to blink, (4) plug in soundbar — rear speakers should pair within 30 seconds (LED goes solid blue). If they don't pair: press and hold the ID SET button on the back of each rear speaker for 5 seconds. Ensure both rear speakers pair — sometimes one pairs and the other doesn't. After pairing, place rear speakers 2-3 feet behind and to the sides of the listening position at ear height.
Error REAR LINK BLINK on the Samsung TV & Audio HW-Q990C 11.1.4 Channel 546 Watt Soundbar with Dolby Atmos, DTS:X, and Wireless Subwoofer means: Rear Speakers Not Connected — Blue LED Blinking. The top-ranked community fix is “Inspect and Replace Rear Speaker Wireless Module” (hard difficulty, ~60 min, DIY cost: $50-$100). 2 community-ranked fixes available below.
Published March 2026 · 2 fixes · soundbar
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many soundbar repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $150-$250.
HDMI ARC Input Mode — Connection Issues
No Sound via HDMI ARC/eARC Connection
Dolby Atmos Not Being Received from TV
Audio Drops Out Intermittently
Soundbar Auto Powers Off After 15-20 Minutes
Bluetooth Mode Active
Soundbar Connects to Wrong Bluetooth Device
Bluetooth Audio Cutting Out / Stuttering
The Samsung TV & Audio HW-Q990C 11.1.4 Channel 546 Watt Soundbar with Dolby Atmos, DTS:X, and Wireless Subwoofer has 8 other known error codes:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx