Pentair Pentair SuperFlo VS Variable Speed Pool Pump NO LEDS Error Fix: No Power

No LEDs are illuminated on the SuperFlo VS control panel. The pump has no power. Check the dedicated circuit breaker — it may be tripped. Check the GFCI outlet or breaker if applicable — the GFCI may have tripped. Inspect the wiring at the pump junction box for loose, corroded, or disconnected wires. Verify voltage at the pump terminals with a multimeter. If voltage is present but no LEDs illuminate, the control board may have failed.

critical2 fixes available✨ Free fix available

Quick Answer

Error NO LEDS on the Pentair Pentair SuperFlo VS Variable Speed Pool Pump means: No Power. The top-ranked community fix is “Inspect and Repair Pump Wiring and Control Board” (hard difficulty, ~60 min, DIY cost: $10-$20). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · pool pump

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many pool pump repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $150-$300.

Other Pentair Pentair SuperFlo VS Variable Speed Pool Pump Error Codes

ALL LEDS FLASH

Overcurrent / Motor Protection

Capacitor Failure

Impeller Obstruction

Motor Fault — LED On but Not Running

Pump Lid O-Ring Leak

Motor Bearing Wear

Shaft Seal Leak

Underspeed Fault

People Also Ask About Pentair Pentair SuperFlo VS Variable Speed Pool Pump Error NO LEDS

What does error code NO LEDS mean on a Pentair Pentair SuperFlo VS Variable Speed Pool Pump?

Error code NO LEDS on the Pentair Pentair SuperFlo VS Variable Speed Pool Pump means: No Power. No LEDs are illuminated on the SuperFlo VS control panel. The pump has no power. Check the dedicated circuit breaker — it may be tripped. Check the GFCI outlet or breaker if applicable — the GFCI may have tripped. Inspect the wiring at the pump junction box for loose, corroded, or disconnected wires. Verify voltage at the pump terminals with a multimeter. If voltage is present but no LEDs illuminate, the control board may have failed.

How do I fix error code NO LEDS on my Pentair Pentair SuperFlo VS Variable Speed Pool Pump?

The most successful fix is "Inspect and Repair Pump Wiring and Control Board" (hard difficulty, ~60 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

Is error code NO LEDS on a Pentair Pentair SuperFlo VS Variable Speed Pool Pump serious?

This error is rated critical severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Can I fix Pentair Pentair SuperFlo VS Variable Speed Pool Pump error NO LEDS myself?

Yes — the top-ranked community fix ("Inspect and Repair Pump Wiring and Control Board") is rated hard difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Electrical contact cleaner.

How much does it cost to repair Pentair Pentair SuperFlo VS Variable Speed Pool Pump error NO LEDS?

DIY cost: $10-$20. Professional repair typically costs $150-$300. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Pentair Pentair SuperFlo VS Variable Speed Pool Pump have?

The Pentair Pentair SuperFlo VS Variable Speed Pool Pump has 8 other known error codes, including: ALL LEDS FLASH (Overcurrent / Motor Protection), CAPACITOR FAIL (Capacitor Failure), IMPELLER CLOG (Impeller Obstruction), LED ON NO RUN (Motor Fault — LED On but Not Running), LID ORING LEAK (Pump Lid O-Ring Leak), and 3 more.

What other error codes does the Pentair Pentair SuperFlo VS Variable Speed Pool Pump have?

The Pentair Pentair SuperFlo VS Variable Speed Pool Pump has 8 other known error codes:

ALL LEDS FLASH — Overcurrent / Motor Protection (2 fixes)
CAPACITOR FAIL — Capacitor Failure (2 fixes)
IMPELLER CLOG — Impeller Obstruction (2 fixes)
LED ON NO RUN — Motor Fault — LED On but Not Running (2 fixes)
LID ORING LEAK — Pump Lid O-Ring Leak (2 fixes)
MOTOR BEARING WEAR — Motor Bearing Wear (2 fixes)
SHAFT SEAL LEAK — Shaft Seal Leak (2 fixes)
SPEED LED FLASH — Underspeed Fault (2 fixes)

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx