🍽️Dishwasher

F13

Miele · Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos

Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos F13 Error Fix: Water Inlet Temperature Too Cold

Incoming water temperature is below the expected minimum threshold. If connected to cold water supply only, this is normal during initial fill and resolves once the heater activates. If connected to hot water supply, check the domestic hot water system. Verify proper plumbing connections.

info2 fixes available✨ Free fix available

Quick Answer

Error F13 on the Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos means: Water Inlet Temperature Too Cold. The top-ranked community fix is “Test and Replace the Water Inlet Temperature Sensor” (medium difficulty, ~45 min, DIY cost: $15-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · dishwasher

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $120-$180.

Other Miele Models with Error F13

Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos

dishwasher · 2 fixes

Other Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos Error Codes

DETERGENT DISP FAIL

Detergent Dispenser Mechanism Failure

2 fixes

DOOR LATCH WEAR

Door Latch Mechanism Worn

Drain Pump Failure

Water Intake Fault

Water Drainage Fault

Water Inlet Temperature Too Hot

Door Fault

Flow Meter / Turbine Fault

2 fixes

People Also Ask About Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos Error F13

What does error code F13 mean on a Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos?

Error code F13 on the Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos means: Water Inlet Temperature Too Cold. Incoming water temperature is below the expected minimum threshold. If connected to cold water supply only, this is normal during initial fill and resolves once the heater activates. If connected to hot water supply, check the domestic hot water system. Verify proper plumbing connections.

How do I fix error code F13 on my Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos?

The most successful fix is "Test and Replace the Water Inlet Temperature Sensor" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code F13 on a Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos serious?

This error is rated info severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Can I fix Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos error F13 myself?

Yes — the top-ranked community fix ("Test and Replace the Water Inlet Temperature Sensor") is rated medium difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Needle-nose pliers.

How much does it cost to repair Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos error F13?

DIY cost: $15-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos have?

The Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos has 8 other known error codes, including: DETERGENT DISP FAIL (Detergent Dispenser Mechanism Failure), DOOR LATCH WEAR (Door Latch Mechanism Worn), DRAIN PUMP FAIL (Drain Pump Failure), F11 (Water Intake Fault), F12 (Water Drainage Fault), and 3 more.

Which other Miele models have the F13 error?

Error code F13 also appears on 1 other Miele model: Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos have?

The Miele Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos has 8 other known error codes:

DETERGENT DISP FAIL — Detergent Dispenser Mechanism Failure (2 fixes)
DOOR LATCH WEAR — Door Latch Mechanism Worn (2 fixes)
DRAIN PUMP FAIL — Drain Pump Failure (2 fixes)
F11 — Water Intake Fault (2 fixes)
F12 — Water Drainage Fault (2 fixes)
F14 — Water Inlet Temperature Too Hot (2 fixes)
F15 — Door Fault (2 fixes)
F19 — Flow Meter / Turbine Fault (2 fixes)

Which other Miele models have the F13 error?

Error code F13 also appears on 1 other Miele model:

Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos (dishwasher) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx