LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry IGNITER FAIL Error Fix: Igniter Failure

Hot-surface igniter develops micro-cracks, loses resistance. Test resistance — 50-400 ohms good, above 600 ohms needs replacement. Consumable part.

High severity2 fixes available✨ Free fix available

Quick Answer

Error IGNITER FAIL on the LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry means: Igniter Failure. The top-ranked community fix is “Replace the Hot-Surface Igniter Assembly” (hard difficulty, ~60 min, DIY cost: $40-$60). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · dryer

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many dryer repairs can be done safely at home, consider hiring a qualified technician if:

This is a high severity error — continued use may cause damage or a safety hazard
The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $150-$250.

Other LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry Error Codes

Child Lock Active

2 fixes

d75

Exhaust Duct 75% Blocked

2 fixes

d80

Exhaust Duct 80% Blocked

2 fixes

d90

Exhaust Duct 90% Blocked

2 fixes

d95

Exhaust Duct 95% Blocked

2 fixes

DRUM BELT WORN

Drum Roller and Belt Wear

Motor Start Error

Clean Lint Filter Reminder

2 fixes

People Also Ask About LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry Error IGNITER FAIL

What does error code IGNITER FAIL mean on a LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry?

Error code IGNITER FAIL on the LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry means: Igniter Failure. Hot-surface igniter develops micro-cracks, loses resistance. Test resistance — 50-400 ohms good, above 600 ohms needs replacement. Consumable part.

How do I fix error code IGNITER FAIL on my LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry?

The most successful fix is "Replace the Hot-Surface Igniter Assembly" (hard difficulty, ~60 minutes). Estimated DIY cost: $40-$60. HomeMD has 2 community-ranked fixes for this error.

Is error code IGNITER FAIL on a LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry serious?

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Can I fix LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry error IGNITER FAIL myself?

Yes — the top-ranked community fix ("Replace the Hot-Surface Igniter Assembly") is rated hard difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Multimeter.

How much does it cost to repair LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry error IGNITER FAIL?

DIY cost: $40-$60. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry have?

The LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry has 8 other known error codes, including: CL (Child Lock Active), d75 (Exhaust Duct 75% Blocked), d80 (Exhaust Duct 80% Blocked), d90 (Exhaust Duct 90% Blocked), d95 (Exhaust Duct 95% Blocked), and 3 more.

What other error codes does the LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry have?

The LG DLG7301WE 7.3 cu. ft. Smart Gas Dryer with Sensor Dry has 8 other known error codes:

CL — Child Lock Active (2 fixes)
d75 — Exhaust Duct 75% Blocked (2 fixes)
d80 — Exhaust Duct 80% Blocked (2 fixes)
d90 — Exhaust Duct 90% Blocked (2 fixes)
d95 — Exhaust Duct 95% Blocked (2 fixes)
DRUM BELT WORN — Drum Roller and Belt Wear (2 fixes)
E13 — Motor Start Error (2 fixes)
FiLtEr — Clean Lint Filter Reminder (2 fixes)

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx