👕Washer

Kenmore · 796.41392 Elite Front-Load Washer

Kenmore 796.41392 Elite Front-Load Washer SE Error Fix: Motor Sensor Error

Motor Hall sensor (rotor position sensor) not providing valid signal. Check Hall sensor connector on motor stator. Clean connector contacts. Replace Hall sensor or stator assembly if defective.

High severity2 fixes available✨ Free fix available

Quick Answer

Error SE on the Kenmore 796.41392 Elite Front-Load Washer means: Motor Sensor Error. The top-ranked community fix is “Test and Replace Motor Hall Sensor or Stator Assembly” (hard difficulty, ~90 min, DIY cost: $20-$40). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · washer

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many washer repairs can be done safely at home, consider hiring a qualified technician if:

This is a high severity error — continued use may cause damage or a safety hazard
The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $150-$250.

Other Kenmore Models with Error SE

721.80373 Elite Over-the-Range Microwave

microwave · 2 fixes

Other Kenmore 796.41392 Elite Front-Load Washer Error Codes

Child Lock Active

2 fixes

Door Open Error

2 fixes

dE1

Door Lock Error — Electrical

2 fixes

dE2

Door Lock Error — Switch

2 fixes

DOOR SEAL MOLD

Door Boot Seal Mold/Mildew

Drain Pump Clogged

Drum Bearing Failure

Overflow Error — Too Much Water

2 fixes

People Also Ask About Kenmore 796.41392 Elite Front-Load Washer Error SE

What does error code SE mean on a Kenmore 796.41392 Elite Front-Load Washer?

Error code SE on the Kenmore 796.41392 Elite Front-Load Washer means: Motor Sensor Error. Motor Hall sensor (rotor position sensor) not providing valid signal. Check Hall sensor connector on motor stator. Clean connector contacts. Replace Hall sensor or stator assembly if defective.

How do I fix error code SE on my Kenmore 796.41392 Elite Front-Load Washer?

The most successful fix is "Test and Replace Motor Hall Sensor or Stator Assembly" (hard difficulty, ~90 minutes). Estimated DIY cost: $20-$40. HomeMD has 2 community-ranked fixes for this error.

Is error code SE on a Kenmore 796.41392 Elite Front-Load Washer serious?

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Can I fix Kenmore 796.41392 Elite Front-Load Washer error SE myself?

Yes — the top-ranked community fix ("Test and Replace Motor Hall Sensor or Stator Assembly") is rated hard difficulty and takes about 90 minutes. Tools needed: Phillips screwdriver, Multimeter, Flashlight.

How much does it cost to repair Kenmore 796.41392 Elite Front-Load Washer error SE?

DIY cost: $20-$40. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Kenmore 796.41392 Elite Front-Load Washer have?

The Kenmore 796.41392 Elite Front-Load Washer has 8 other known error codes, including: CL (Child Lock Active), dE (Door Open Error), dE1 (Door Lock Error — Electrical), dE2 (Door Lock Error — Switch), DOOR SEAL MOLD (Door Boot Seal Mold/Mildew), and 3 more.

Which other Kenmore models have the SE error?

Error code SE also appears on 1 other Kenmore model: 721.80373 Elite Over-the-Range Microwave. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Kenmore 796.41392 Elite Front-Load Washer have?

The Kenmore 796.41392 Elite Front-Load Washer has 8 other known error codes:

CL — Child Lock Active (2 fixes)
dE — Door Open Error (2 fixes)
dE1 — Door Lock Error — Electrical (2 fixes)
dE2 — Door Lock Error — Switch (2 fixes)
DOOR SEAL MOLD — Door Boot Seal Mold/Mildew (2 fixes)
DRAIN PUMP CLOG — Drain Pump Clogged (2 fixes)
DRUM BEARING FAIL — Drum Bearing Failure (2 fixes)
FE — Overflow Error — Too Much Water (2 fixes)

Which other Kenmore models have the SE error?

Error code SE also appears on 1 other Kenmore model:

721.80373 Elite Over-the-Range Microwave (microwave) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx