Kenmore 580.74124 Window Air Conditioner 10,000 BTU FAN MOTOR FAIL Error Fix: Fan Motor Failure

Compressor runs but no air blowing, or weak airflow. Fan motor has failed or capacitor is bad. Replace fan motor and/or run capacitor. On window units, a single motor usually drives both indoor and outdoor fans.

High severity2 fixes available✨ Free fix available

Quick Answer

Error FAN MOTOR FAIL on the Kenmore 580.74124 Window Air Conditioner 10,000 BTU means: Fan Motor Failure. The top-ranked community fix is “Replace Fan Motor and Run Capacitor” (medium difficulty, ~90 min, DIY cost: $10-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · air conditioner

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many air conditioner repairs can be done safely at home, consider hiring a qualified technician if:

This is a high severity error — continued use may cause damage or a safety hazard
The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $150-$250.

Other Kenmore 580.74124 Window Air Conditioner 10,000 BTU Error Codes

Auto-Shutoff Activated

Capacitor Failure

Dirty Filter Restricting Airflow

2 fixes

Room Temperature Sensor Error

2 fixes

Evaporator Coil Sensor Error

2 fixes

Condenser Coil Sensor Error

2 fixes

EEPROM Error

2 fixes

FROZEN COIL

Evaporator Coil Freezing Up

2 fixes

People Also Ask About Kenmore 580.74124 Window Air Conditioner 10,000 BTU Error FAN MOTOR FAIL

What does error code FAN MOTOR FAIL mean on a Kenmore 580.74124 Window Air Conditioner 10,000 BTU?

Error code FAN MOTOR FAIL on the Kenmore 580.74124 Window Air Conditioner 10,000 BTU means: Fan Motor Failure. Compressor runs but no air blowing, or weak airflow. Fan motor has failed or capacitor is bad. Replace fan motor and/or run capacitor. On window units, a single motor usually drives both indoor and outdoor fans.

How do I fix error code FAN MOTOR FAIL on my Kenmore 580.74124 Window Air Conditioner 10,000 BTU?

The most successful fix is "Replace Fan Motor and Run Capacitor" (medium difficulty, ~90 minutes). Estimated DIY cost: $10-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code FAN MOTOR FAIL on a Kenmore 580.74124 Window Air Conditioner 10,000 BTU serious?

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Can I fix Kenmore 580.74124 Window Air Conditioner 10,000 BTU error FAN MOTOR FAIL myself?

Yes — the top-ranked community fix ("Replace Fan Motor and Run Capacitor") is rated medium difficulty and takes about 90 minutes. Tools needed: Phillips screwdriver, Needle-nose pliers, Multimeter.

How much does it cost to repair Kenmore 580.74124 Window Air Conditioner 10,000 BTU error FAN MOTOR FAIL?

DIY cost: $10-$25. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Kenmore 580.74124 Window Air Conditioner 10,000 BTU have?

The Kenmore 580.74124 Window Air Conditioner 10,000 BTU has 8 other known error codes, including: AS (Auto-Shutoff Activated), CAPACITOR FAIL (Capacitor Failure), DIRTY FILTER (Dirty Filter Restricting Airflow), E1 (Room Temperature Sensor Error), E2 (Evaporator Coil Sensor Error), and 3 more.

What other error codes does the Kenmore 580.74124 Window Air Conditioner 10,000 BTU have?

The Kenmore 580.74124 Window Air Conditioner 10,000 BTU has 8 other known error codes:

AS — Auto-Shutoff Activated (2 fixes)
CAPACITOR FAIL — Capacitor Failure (2 fixes)
DIRTY FILTER — Dirty Filter Restricting Airflow (2 fixes)
E1 — Room Temperature Sensor Error (2 fixes)
E2 — Evaporator Coil Sensor Error (2 fixes)
E4 — Condenser Coil Sensor Error (2 fixes)
E5 — EEPROM Error (2 fixes)
FROZEN COIL — Evaporator Coil Freezing Up (2 fixes)

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx