MECH-07
Jenn-Air · JGS1450FS Gas Range 30 in 5.0 cu ft 18,000 BTU Gas Range with Even-Heat True Convection
The self-clean door latch mechanism is stuck in the locked or partially locked position — the oven door cannot be opened or the self-clean cycle cannot start; do NOT force the latch; disconnect power for 5 minutes and reconnect — the control may attempt to reset the latch motor automatically; if still stuck, access the latch mechanism from behind the control panel area and manually operate the latch engagement lever; the latch motor, linkage, or door lock switch may need replacement
Error MECH-07 on the Jenn-Air JGS1450FS Gas Range 30 in 5.0 cu ft 18,000 BTU Gas Range with Even-Heat True Convection means: Self-Clean Door Latch Jammed. The top-ranked community fix is “Replace Door Latch Motor and Linkage Assembly” (medium difficulty, ~60 min, DIY cost: $10-$20). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · oven
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many oven repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $220-$320.
refrigerator · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
refrigerator · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
refrigerator · 2 fixes
EEPROM Communication Error
EEPROM Checksum Error
Safety Relay Test Failed
Model ID / Configuration Mismatch
Calibration Data Shifted or Corrupt
Shorted Keypad / Touch Interface
Keypad Cable Disconnected
Cancel Key Short
The Jenn-Air JGS1450FS Gas Range 30 in 5.0 cu ft 18,000 BTU Gas Range with Even-Heat True Convection has 8 other known error codes:
Error code MECH-07 also appears on 9 other Jenn-Air models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx