Jenn-Air JGS1450FS Gas Range 30 in 5.0 cu ft 18,000 BTU Gas Range with Even-Heat True Convection F9E0 Error Fix: Door Lock / Latch Motor Failure

Error code F9E0 on the Jenn-Air JGS1450FS Gas Range 30 in 5.0 cu ft 18,000 BTU Gas Range with Even-Heat True Convection means: Door Lock / Latch Motor Failure. The door latch motor is not responding to the control board's commands — check for continuity across the motor terminals with a multimeter; check the motor connector and wiring harness; if the motor tests good electrically but does not operate, the EOC board's motor drive circuit may have failed; replace the lock motor first as it is the more common failure point

The most successful fix is "Replace the Door Latch Motor Assembly" (medium difficulty, ~40 minutes). Estimated DIY cost: $20-$30. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace the Door Latch Motor Assembly") is rated medium difficulty and takes about 40 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Needle-nose pliers.

DIY cost: $20-$30. Professional repair typically costs $160-$260. Many homeowners save money by trying the top-ranked community fix first.

The Jenn-Air JGS1450FS Gas Range 30 in 5.0 cu ft 18,000 BTU Gas Range with Even-Heat True Convection has 8 other known error codes, including: F1E0 (EEPROM Communication Error), F1E1 (EEPROM Checksum Error), F1E2 (Safety Relay Test Failed), F1E4 (Model ID / Configuration Mismatch), F1E5 (Calibration Data Shifted or Corrupt), and 3 more.

Error code F9E0 also appears on 3 other Jenn-Air models: JGRP536HL 36 in Pro-Style Gas Range with 5.8 cu ft Convection Oven, JJW2830IM Wall Oven 30 in 4.1 cu ft Single Wall Oven with True Convection and Self-Clean, JMW2430IM 30 in Combination Microwave Wall Oven with True Convection. The fix may vary by model, so check each model's specific page for tailored repair steps.