F2E1
Jenn-Air · JGRP536HL 36 in Pro-Style Gas Range with 5.8 cu ft Convection Oven
The ribbon cable between the touchpad overlay and the EOC board is disconnected, damaged, or has a broken conductor — inspect and reseat the ribbon cable connection at both ends; check the cable for physical damage, kinks, or torn conductors; on Jenn-Air wall ovens the ribbon cable can be pinched during installation or service; replace the cable or touchpad assembly if the cable is damaged
Error F2E1 on the Jenn-Air JGRP536HL 36 in Pro-Style Gas Range with 5.8 cu ft Convection Oven means: Keypad Cable Disconnected. The top-ranked community fix is “Replace Ribbon Cable or Touchpad Assembly” (medium difficulty, ~45 min, DIY cost: $15-$30). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · oven
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many oven repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $120-$200.
dishwasher · 2 fixes
dishwasher · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
EEPROM Communication Error
EEPROM Checksum Error
Safety Relay Test Failed
Model ID / Configuration Mismatch
Calibration Data Shifted or Corrupt
Shorted Keypad / Touch Interface
Cancel Key Short
Oven Temperature Sensor Open
The Jenn-Air JGRP536HL 36 in Pro-Style Gas Range with 5.8 cu ft Convection Oven has 8 other known error codes:
Error code F2E1 also appears on 5 other Jenn-Air models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx