Husqvarna 460 Rancher 24 in 60cc Gas Chainsaw BRAKE STUCK Error Fix: Chain Brake Will Not Release

Error code BRAKE STUCK on the Husqvarna 460 Rancher 24 in 60cc Gas Chainsaw means: Chain Brake Will Not Release. The chain brake is stuck engaged and the chain cannot move — the chain brake is a critical safety feature that stops the chain during kickback; the brake band wraps around the clutch drum and is tensioned by a spring; if the brake was activated during cutting (by inertia or hand guard contact) and does not release when the hand guard is pulled back, the brake band may be warped, the brake spring may be broken, or the mechanism may have debris in it; do not attempt to bypass the chain brake; disassemble and inspect the brake mechanism and replace worn components

The most successful fix is "Disassemble and Replace Worn Chain Brake Components" (hard difficulty, ~60 minutes). Estimated DIY cost: $20-$40. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Disassemble and Replace Worn Chain Brake Components") is rated hard difficulty and takes about 60 minutes. Tools needed: 13mm wrench, T25 Torx screwdriver, Needle-nose pliers, Gloves.

DIY cost: $20-$40. Professional repair typically costs $150-$200. Many homeowners save money by trying the top-ranked community fix first.

The Husqvarna 460 Rancher 24 in 60cc Gas Chainsaw has 8 other known error codes, including: AIR FILTER (Air Filter Clogged or Restricted), BAR DAMAGE (Guide Bar Bent or Worn), CHAIN FLIES OFF (Chain Comes Off Guide Bar), CHAIN STOPS (Chain Stops Under Load), CORD WON'T RETRACT (Starter Cord Will Not Retract), and 3 more.

Error code BRAKE STUCK also appears on 1 other Husqvarna model: 455 Rancher 55.5 cc 3.5 HP Gas Chainsaw with X-Torq Engine and Air Injection. The fix may vary by model, so check each model's specific page for tailored repair steps.