Hotpoint RBS360DMWW 5.0 cu ft 30 in Free-Standing Electric Range with Self-Clean Oven F0 Error Fix: Stuck Touch Pad Key

Error code F0 on the Hotpoint RBS360DMWW 5.0 cu ft 30 in Free-Standing Electric Range with Self-Clean Oven means: Stuck Touch Pad Key. A key on the touch pad (membrane switch) is stuck or the Electronic Range Control (ERC) has detected continuous unintended input from a shorted keypad — press CLEAR/OFF to attempt to cancel; if the code returns after power cycling (disconnect breaker for 30 seconds), the touch pad membrane may have moisture behind it from cooking steam or the membrane itself has failed; the touch pad and ERC are usually separate parts on Hotpoint ranges — try replacing the touch pad overlay first as it is less expensive and more commonly at fault than the control board

The most successful fix is "Replace Touch Pad Overlay Assembly" (medium difficulty, ~45 minutes). Estimated DIY cost: $30-$50. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace Touch Pad Overlay Assembly") is rated medium difficulty and takes about 45 minutes. Tools needed: Phillips #2 screwdriver, Needle-nose pliers.

DIY cost: $30-$50. Professional repair typically costs $150-$220. Many homeowners save money by trying the top-ranked community fix first.

The Hotpoint RBS360DMWW 5.0 cu ft 30 in Free-Standing Electric Range with Self-Clean Oven has 8 other known error codes, including: F1 (Electronic Oven Control (ERC) Internal Failure), F2 (Oven Over-Temperature Condition), F3 (Open Oven Temperature Sensor (RTD Probe)), F4 (Shorted Oven Temperature Sensor (RTD Probe)), F5 (ERC Relay Board Failure), and 3 more.

Error code F0 also appears on 1 other Hotpoint model: RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates. The fix may vary by model, so check each model's specific page for tailored repair steps.