Hotpoint HTX24GASKWS 6.2 cu ft Gas Dryer with Auto Dry and Wrinkle Prevent Option MECH-11 Error Fix: Intermittent Heating — Heats Initially Then Stops

Error code MECH-11 on the Hotpoint HTX24GASKWS 6.2 cu ft Gas Dryer with Auto Dry and Wrinkle Prevent Option means: Intermittent Heating — Heats Initially Then Stops. The gas dryer heats properly at the start of the cycle but stops producing heat partway through, resulting in damp clothes — this is classic gas valve solenoid coil failure; the coils work when they are cool at the start of the cycle, but as the dryer heats up, the solenoid coils thermal resistance increases and they can no longer hold the gas valve open; the gas shuts off mid-cycle and does not re-ignite; each time the dryer calls for heat, the igniter glows again but the gas never flows; replace both gas valve solenoid coils (do not replace just one); this intermittent pattern distinguishes solenoid coil failure from other causes of no-heat which are typically constant from the start

The most successful fix is "Replace Gas Valve Solenoid Coils to Fix Thermal Fatigue Failure" (medium difficulty, ~60 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace Gas Valve Solenoid Coils to Fix Thermal Fatigue Failure") is rated medium difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Needle-nose pliers, Multimeter.

DIY cost: $15-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

The Hotpoint HTX24GASKWS 6.2 cu ft Gas Dryer with Auto Dry and Wrinkle Prevent Option has 8 other known error codes, including: MECH-01 (No Heat — Drum Tumbles But Clothes Don't Dry), MECH-02 (Drum Not Turning — Motor Runs or Hums), MECH-03 (Takes Too Long to Dry — Extended Cycle Times), MECH-04 (Loud Thumping, Squealing, or Scraping Noise), MECH-05 (Overheating — Dryer or Clothes Too Hot), and 3 more.

Error code MECH-11 also appears on 1 other Hotpoint model: HSS25GFTWW 25.3 cu ft Side-by-Side Refrigerator with Ice & Water Dispenser and LED Interior Lighting. The fix may vary by model, so check each model's specific page for tailored repair steps.