MECH-05
Hotpoint · HDA3600HWW 24 in Built-In Dishwasher with 48 dBA Noise Level and 5 Wash Cycles
Dishes are still wet at the end of the cycle even with heated dry selected — the heating element (calrod at the bottom of the tub) may have burned out; test for continuity with a multimeter (should read 15-30 ohms); check the high-limit thermostat connected to the element for continuity; ensure the rinse aid dispenser is full — rinse aid is essential for proper drying as it reduces water surface tension and allows water to sheet off dishes; on basic Hotpoint models like this one, the drying relies entirely on the heat element and rinse aid since there is no fan-assisted drying
Error MECH-05 on the Hotpoint HDA3600HWW 24 in Built-In Dishwasher with 48 dBA Noise Level and 5 Wash Cycles means: Not Drying Dishes. The top-ranked community fix is “Test and Replace Heating Element and Thermostat” (medium difficulty, ~60 min, DIY cost: $20-$40). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · dishwasher
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $130-$200.
refrigerator · 2 fixes
refrigerator · 2 fixes
refrigerator · 2 fixes
washer · 2 fixes
washer · 2 fixes
dryer · 2 fixes
dryer · 2 fixes
Not Draining — Water Standing in Tub After Cycle
Not Filling with Water
Dishes Not Getting Clean
Leaking Water on Floor
Loud or Unusual Noise During Operation
Door Won't Close or Latch Properly
Detergent Dispenser Not Opening
Constant Running or Timer Not Advancing
The Hotpoint HDA3600HWW 24 in Built-In Dishwasher with 48 dBA Noise Level and 5 Wash Cycles has 8 other known error codes:
Error code MECH-05 also appears on 7 other Hotpoint models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx