⚡Standby Generator

Generac · Guardian 24kW Home Standby Generator

Generac Guardian 24kW Home Standby Generator 1505 Error Fix: RPM Sensor Fault

RPM sensor failed during generator operation — replace the magnetic pickup sensor; check wiring harness for chafe or damage where it routes near hot or moving components; test sensor resistance with multimeter

Medium severity2 fixes available✨ Free fix available

Quick Answer

Error 1505 on the Generac Guardian 24kW Home Standby Generator means: RPM Sensor Fault. The top-ranked community fix is “Replace RPM Magnetic Pickup Sensor and Test Wiring” (medium difficulty, ~60 min, DIY cost: $15-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · standby generator

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many standby generator repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $120-$180.

Other Generac Models with Error 1505

Guardian 14kW Home Standby Generator

standby_generator · 2 fixes

Guardian 22kW 22,000 Watt 200 Amp Standby Generator with Mobile Link WiFi Monitoring

standby_generator · 2 fixes

Other Generac Guardian 24kW Home Standby Generator Error Codes

Overcrank

Overspeed

Low Oil Pressure

High Temperature

RPM Sense Loss

RPM Sensor Low

Governor Actuator

Firmware Error

People Also Ask About Generac Guardian 24kW Home Standby Generator Error 1505

What does error code 1505 mean on a Generac Guardian 24kW Home Standby Generator?

Error code 1505 on the Generac Guardian 24kW Home Standby Generator means: RPM Sensor Fault. RPM sensor failed during generator operation — replace the magnetic pickup sensor; check wiring harness for chafe or damage where it routes near hot or moving components; test sensor resistance with multimeter

How do I fix error code 1505 on my Generac Guardian 24kW Home Standby Generator?

The most successful fix is "Replace RPM Magnetic Pickup Sensor and Test Wiring" (medium difficulty, ~60 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code 1505 on a Generac Guardian 24kW Home Standby Generator serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix Generac Guardian 24kW Home Standby Generator error 1505 myself?

Yes — the top-ranked community fix ("Replace RPM Magnetic Pickup Sensor and Test Wiring") is rated medium difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Wire strippers, Electrical tape.

How much does it cost to repair Generac Guardian 24kW Home Standby Generator error 1505?

DIY cost: $15-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Generac Guardian 24kW Home Standby Generator have?

The Generac Guardian 24kW Home Standby Generator has 8 other known error codes, including: 1100 (Overcrank), 1200 (Overspeed), 1300 (Low Oil Pressure), 1400 (High Temperature), 1500 (RPM Sense Loss), and 3 more.

Which other Generac models have the 1505 error?

Error code 1505 also appears on 2 other Generac models: Guardian 14kW Home Standby Generator, Guardian 22kW 22,000 Watt 200 Amp Standby Generator with Mobile Link WiFi Monitoring. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Generac Guardian 24kW Home Standby Generator have?

The Generac Guardian 24kW Home Standby Generator has 8 other known error codes:

Which other Generac models have the 1505 error?

Error code 1505 also appears on 2 other Generac models:

Guardian 14kW Home Standby Generator (standby generator) · 2 fixes
Guardian 22kW 22,000 Watt 200 Amp Standby Generator with Mobile Link WiFi Monitoring (standby generator) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx