GE JT5000SFSS 5.0 cu ft Built-In Convection Wall Oven MECH-ELEMENT Error Fix: Bake or Broil Element Burned Out

Error code MECH-ELEMENT on the GE JT5000SFSS 5.0 cu ft Built-In Convection Wall Oven means: Bake or Broil Element Burned Out. The bake element (bottom of oven) or broil element (top of oven) has visibly failed — look for a break, hole, blister, or bright spot on the element coil; a burned-out element will have infinite resistance on a multimeter (should read 20-50 ohms normally); wall oven elements are accessed from inside the oven cavity by removing 2-4 mounting screws

The most successful fix is "Replace Burned-Out Bake or Broil Element" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$30. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace Burned-Out Bake or Broil Element") is rated medium difficulty and takes about 45 minutes. Tools needed: Phillips screwdriver, Multimeter.

DIY cost: $15-$30. Professional repair typically costs $120-$200. Many homeowners save money by trying the top-ranked community fix first.

The GE JT5000SFSS 5.0 cu ft Built-In Convection Wall Oven has 8 other known error codes, including: F1E0 (Control Board Internal Failure), F1E1 (Control Board EEPROM Error), F2E0 (Stuck Key on Touch Pad), F2E1 (Key Panel Connection Error), F3E0 (Upper Oven Temperature Sensor Open), and 3 more.

Error code MECH-ELEMENT also appears on 13 other GE models: JB645RKSS 30 in 5.3 cu ft Electric Range with Convection Oven and Self-Clean, JB655SKSS 30 in 5.3 cu ft Slide-In Electric Convection Oven Stainless Steel, JB655YKFS 5.3 cu ft Electric Range with Self-Clean, JB735SPSS 5.3 cu ft Freestanding Electric Convection, JB750SJSS Electric Convection Range, JGB735SPSS 5.0 cu ft Freestanding Gas Convection, and 7 more. The fix may vary by model, so check each model's specific page for tailored repair steps.