GE GFD85ESPNRS 7.8 cu ft Smart Front Load Electric Dryer with Steam tE Error Fix: Exhaust Thermistor Error

Error code tE on the GE GFD85ESPNRS 7.8 cu ft Smart Front Load Electric Dryer with Steam means: Exhaust Thermistor Error. The exhaust temperature sensor (thermistor) has failed — this sensor is located in or near the exhaust duct and monitors the temperature of air leaving the drum; an open or shorted circuit triggers this error; a failed exhaust thermistor can cause the dryer to run without heat (for safety) or not run at all; replace the sensor and check the wiring

The most successful fix is "Test and Replace the Exhaust Thermistor Sensor" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Test and Replace the Exhaust Thermistor Sensor") is rated medium difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Needle-nose pliers.

DIY cost: $15-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

The GE GFD85ESPNRS 7.8 cu ft Smart Front Load Electric Dryer with Steam has 8 other known error codes, including: dE (Door Switch Not Closed), E1 (Thermistor (Temperature Sensor) Failure), E2 (Stuck Key on Control Panel), E3 (Drive Motor Fault), HE (Heater Circuit Error), and 3 more.

Error code tE also appears on 3 other GE models: GFD55ESSNWW 7.8 cu ft Smart Front Load Electric, GFD65ESSNWW 7.8 cu ft Smart Front Load Steam Electric, GFD85ESSNWW 7.8 cu ft Smart Front Load Electric with Sanitize. The fix may vary by model, so check each model's specific page for tailored repair steps.