GE GFD55ESSNWW 7.8 cu ft Smart Front Load Electric HE Error Fix: Heater Circuit Error

Error code HE on the GE GFD55ESSNWW 7.8 cu ft Smart Front Load Electric means: Heater Circuit Error. The dryer heating circuit has a fault — the heating element, hi-limit thermostat, or cycling thermostat has an abnormal condition; on electric dryers, check the heating element for continuity (should read 10-20 ohms); also check the hi-limit thermostat and thermal fuse for continuity; if the thermal fuse is blown, ALWAYS clean the dryer vent duct first — a clogged vent is the root cause of blown thermal fuses and it will blow again if not cleaned

The most successful fix is "Test and Replace Heating Element or Thermostats" (medium difficulty, ~60 minutes). Estimated DIY cost: $15-$30. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Test and Replace Heating Element or Thermostats") is rated medium difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Multimeter, Needle-nose pliers.

DIY cost: $15-$30. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

The GE GFD55ESSNWW 7.8 cu ft Smart Front Load Electric has 8 other known error codes, including: dE (Door Switch Not Closed), E1 (Thermistor (Temperature Sensor) Failure), E2 (Stuck Key on Control Panel), E3 (Drive Motor Fault), MECH-BELT (Drum Not Turning — Belt Broken), and 3 more.

Error code HE also appears on 3 other GE models: GFD65ESSNWW 7.8 cu ft Smart Front Load Steam Electric, GFD85ESPNRS 7.8 cu ft Smart Front Load Electric Dryer with Steam, GFD85ESSNWW 7.8 cu ft Smart Front Load Electric with Sanitize. The fix may vary by model, so check each model's specific page for tailored repair steps.