GE GDP630PYRFS 24 in Front Control Built-In Dishwasher 50 dBA Stainless Steel BLINK-ALL Error Fix: All Indicator Lights On But No Response

Error code BLINK-ALL on the GE GDP630PYRFS 24 in Front Control Built-In Dishwasher 50 dBA Stainless Steel means: All Indicator Lights On But No Response. All lights on the control panel are illuminated but the dishwasher does not respond to button presses — the main control board has experienced a firmware hang or has failed; try a power reset by disconnecting at the circuit breaker for 60 seconds; if the condition recurs, the main control board may need replacement; check for water leaks that may have shorted the control board

The most successful fix is "Replace the Main Control Board" (hard difficulty, ~90 minutes). Estimated DIY cost: $50-$70. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace the Main Control Board") is rated hard difficulty and takes about 90 minutes. Tools needed: Phillips screwdriver, Needle nose pliers, Flashlight.

DIY cost: $50-$70. Professional repair typically costs $250-$400. Many homeowners save money by trying the top-ranked community fix first.

The GE GDP630PYRFS 24 in Front Control Built-In Dishwasher 50 dBA Stainless Steel has 8 other known error codes, including: BEEP-1 (Single Beep + Flash — Water Fill Issue), BEEP-2 (Two Beeps — Door Not Latched), BEEP-3 (Three Beeps — Water Temperature Issue), BLINK-1 (Start/Reset Light Flashing — Cycle Interrupted), BLINK-7 (Start Light Blinks Seven Times — Heating Element Fault), and 3 more.

Error code BLINK-ALL also appears on 8 other GE models: GDF535PGRSS 24 in Front Control with Steam Prewash, GDF630PSMSS 24 in Front Control Dishwasher, GDF645SSNSS 24 in Front Control with Steam & Sanitize, GDP670SYVFS 24 in Top Control Smart with Dry Boost, GDT226SSLSS 24 in Built-In Dishwasher with Piranha Disposal, GDT550PYRFS 24 in Top Control with Sanitize Cycle, and 2 more. The fix may vary by model, so check each model's specific page for tailored repair steps.