🌀Dryer

MECH-IGNITER

GE Profile · PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize

GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize MECH-IGNITER Error Fix: Gas Igniter Glows But No Flame

Igniter glows bright orange but gas does not flow — gas valve solenoid coils have failed; very common and inexpensive repair (~$15 pair); replace both coils even if only one has failed

Medium severity2 fixes available✨ Free fix available

Quick Answer

Error MECH-IGNITER on the GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize means: Gas Igniter Glows But No Flame. The top-ranked community fix is “Replace Gas Valve Solenoid Coils” (medium difficulty, ~45 min, DIY cost: $15-$20). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · dryer

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many dryer repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $120-$180.

Other GE Profile Models with Error MECH-IGNITER

PB935YPFS 30 in Slide-In Gas Range 22,000 BTU with True European Convection

oven · 2 fixes

PGB935YPFS 6.7 cu ft Smart Slide-In Double Oven Gas

oven · 2 fixes

PGBS960YPFS 6.7 cu ft Smart Free-Standing Gas

oven · 2 fixes

PGS930SELSS 5.6 cu ft Smart Slide-In Gas Convection

oven · 2 fixes

PTD90GBPTDG 7.4 cu ft Smart Gas with HE Sensor Dry

dryer · 2 fixes

Other GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize Error Codes

Door Not Closed

2 fixes

Inlet Thermistor Open/Short

2 fixes

Outlet Thermistor Open/Short

2 fixes

Motor Fault

2 fixes

MECH-BELT

Drum Does Not Turn — Motor Runs

2 fixes

MECH-DOOR

Door Switch Failure — Dryer Will Not Start

2 fixes

MECH-FUSE

Dryer Will Not Start at All

2 fixes

MECH-NOHEAT

Not Heating — Drum Turns Normally

2 fixes

People Also Ask About GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize Error MECH-IGNITER

What does error code MECH-IGNITER mean on a GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize?

Error code MECH-IGNITER on the GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize means: Gas Igniter Glows But No Flame. Igniter glows bright orange but gas does not flow — gas valve solenoid coils have failed; very common and inexpensive repair (~$15 pair); replace both coils even if only one has failed

How do I fix error code MECH-IGNITER on my GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize?

The most successful fix is "Replace Gas Valve Solenoid Coils" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$20. HomeMD has 2 community-ranked fixes for this error.

Is error code MECH-IGNITER on a GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize error MECH-IGNITER myself?

Yes — the top-ranked community fix ("Replace Gas Valve Solenoid Coils") is rated medium difficulty and takes about 45 minutes. Tools needed: #2 Phillips screwdriver, Multimeter.

How much does it cost to repair GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize error MECH-IGNITER?

DIY cost: $15-$20. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize have?

The GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize has 8 other known error codes, including: dE (Door Not Closed), E1 (Inlet Thermistor Open/Short), E2 (Outlet Thermistor Open/Short), E3 (Motor Fault), MECH-BELT (Drum Does Not Turn — Motor Runs), and 3 more.

Which other GE Profile models have the MECH-IGNITER error?

Error code MECH-IGNITER also appears on 5 other GE Profile models: PB935YPFS 30 in Slide-In Gas Range 22,000 BTU with True European Convection, PGB935YPFS 6.7 cu ft Smart Slide-In Double Oven Gas, PGBS960YPFS 6.7 cu ft Smart Free-Standing Gas, PGS930SELSS 5.6 cu ft Smart Slide-In Gas Convection, PTD90GBPTDG 7.4 cu ft Smart Gas with HE Sensor Dry. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize have?

The GE Profile PTD60GBSRWS 7.4 cu ft Smart Gas Dryer with Sanitize has 8 other known error codes:

dE — Door Not Closed (2 fixes)
E1 — Inlet Thermistor Open/Short (2 fixes)
E2 — Outlet Thermistor Open/Short (2 fixes)
E3 — Motor Fault (2 fixes)
MECH-BELT — Drum Does Not Turn — Motor Runs (2 fixes)
MECH-DOOR — Door Switch Failure — Dryer Will Not Start (2 fixes)
MECH-FUSE — Dryer Will Not Start at All (2 fixes)
MECH-NOHEAT — Not Heating — Drum Turns Normally (2 fixes)

Which other GE Profile models have the MECH-IGNITER error?

Error code MECH-IGNITER also appears on 5 other GE Profile models:

PB935YPFS 30 in Slide-In Gas Range 22,000 BTU with True European Convection (oven) · 2 fixes
PGB935YPFS 6.7 cu ft Smart Slide-In Double Oven Gas (oven) · 2 fixes
PGBS960YPFS 6.7 cu ft Smart Free-Standing Gas (oven) · 2 fixes
PGS930SELSS 5.6 cu ft Smart Slide-In Gas Convection (oven) · 2 fixes
PTD90GBPTDG 7.4 cu ft Smart Gas with HE Sensor Dry (dryer) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx