GE Profile PHS930YPFS 5.3 cu ft Smart Slide-In Induction F48 Error Fix: Cooktop EEPROM Error

Error code F48 on the GE Profile PHS930YPFS 5.3 cu ft Smart Slide-In Induction means: Cooktop EEPROM Error. The cooktop control board EEPROM has corrupted data — stored configuration or calibration failed integrity check; control board must be replaced

The most successful fix is "Replace the Cooktop Control Board to Fix EEPROM Corruption" (hard difficulty, ~90 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace the Cooktop Control Board to Fix EEPROM Corruption") is rated hard difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Nut driver set.

DIY cost: $15-$25. Professional repair typically costs $250-$350. Many homeowners save money by trying the top-ranked community fix first.

The GE Profile PHS930YPFS 5.3 cu ft Smart Slide-In Induction has 8 other known error codes, including: F0 (Stuck Touch Pad Key), F1 (Electronic Oven Control (ERC) Failure), F131 (Coil Temperature Sensor Failure), F132 (IGBT Over-Temperature), F133 (Incompatible Cookware Detected), and 3 more.

Error code F48 also appears on 11 other GE Profile models: PDP715SYNFS Top Control DW, PDP755SBNTS 24 in Smart Top Control with Microban, PDP755SYRFS 24 in Top Control with Dry Boost and Piranha, PDT715SYNFS 24 in Top Control with 46 dBA, PDT775SYNFS 24 in Front Control Dishwasher 44 dBA with Steam and WiFi Connect, PDT785SYNFS 24 in Smart Top Control Fingerprint Resistant, and 5 more. The fix may vary by model, so check each model's specific page for tailored repair steps.