👕Washer

MECH-LID

Frigidaire · GLTF2940FS 3.5 cu ft Gallery Top Load

Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load MECH-LID Error Fix: Lid Switch or Lock Failure

The washer will not start or stops mid-cycle because the lid switch or lid lock mechanism has failed. The lid switch is a safety device that stops the spin cycle when the lid is opened. Test the lid switch for continuity with the lid closed. On newer models with a motorized lid lock, test the lock actuator. Replace the lid switch or lid lock assembly if defective.

High severity2 fixes available✨ Free fix available

Quick Answer

Error MECH-LID on the Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load means: Lid Switch or Lock Failure. The top-ranked community fix is “Replace the Lid Switch or Lid Lock Assembly” (medium difficulty, ~60 min, DIY cost: $20-$35). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · washer

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many washer repairs can be done safely at home, consider hiring a qualified technician if:

This is a high severity error — continued use may cause damage or a safety hazard
The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $110-$160.

Other Frigidaire Models with Error MECH-LID

FFLG4033QW 3.8 cu ft Top Load with Stainless Drum

washer · 2 fixes

FFTW4120SW 3.5 cu ft Top Load Washer with Dual Action Agitator and 700 RPM Spin Speed

washer · 2 fixes

FFTW4120SW2 4.1 cu ft Top Load Washer

washer · 2 fixes

Other Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load Error Codes

E11

Fill Timeout — No Water Supply

2 fixes

E21

Drain Timeout — Water Not Draining

2 fixes

E35

Water Overfill Detected

2 fixes

E41

Lid Not Closed or Lid Lock Fault

Motor Signal Error

Motor Overheating

Incorrect Voltage to Control Board

2 fixes

EB1

Incoming Power Frequency Out of Limits

2 fixes

People Also Ask About Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load Error MECH-LID

What does error code MECH-LID mean on a Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load?

Error code MECH-LID on the Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load means: Lid Switch or Lock Failure. The washer will not start or stops mid-cycle because the lid switch or lid lock mechanism has failed. The lid switch is a safety device that stops the spin cycle when the lid is opened. Test the lid switch for continuity with the lid closed. On newer models with a motorized lid lock, test the lock actuator. Replace the lid switch or lid lock assembly if defective.

How do I fix error code MECH-LID on my Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load?

The most successful fix is "Replace the Lid Switch or Lid Lock Assembly" (medium difficulty, ~60 minutes). Estimated DIY cost: $20-$35. HomeMD has 2 community-ranked fixes for this error.

Is error code MECH-LID on a Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load serious?

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Can I fix Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load error MECH-LID myself?

Yes — the top-ranked community fix ("Replace the Lid Switch or Lid Lock Assembly") is rated medium difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Multimeter.

How much does it cost to repair Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load error MECH-LID?

DIY cost: $20-$35. Professional repair typically costs $110-$160. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load have?

The Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load has 8 other known error codes, including: E11 (Fill Timeout — No Water Supply), E21 (Drain Timeout — Water Not Draining), E35 (Water Overfill Detected), E41 (Lid Not Closed or Lid Lock Fault), E52 (Motor Signal Error), and 3 more.

Which other Frigidaire models have the MECH-LID error?

Error code MECH-LID also appears on 3 other Frigidaire models: FFLG4033QW 3.8 cu ft Top Load with Stainless Drum, FFTW4120SW 3.5 cu ft Top Load Washer with Dual Action Agitator and 700 RPM Spin Speed, FFTW4120SW2 4.1 cu ft Top Load Washer. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load have?

The Frigidaire GLTF2940FS 3.5 cu ft Gallery Top Load has 8 other known error codes:

E11 — Fill Timeout — No Water Supply (2 fixes)
E21 — Drain Timeout — Water Not Draining (2 fixes)
E35 — Water Overfill Detected (2 fixes)
E41 — Lid Not Closed or Lid Lock Fault (2 fixes)
E52 — Motor Signal Error (2 fixes)
E55 — Motor Overheating (2 fixes)
E67 — Incorrect Voltage to Control Board (2 fixes)
EB1 — Incoming Power Frequency Out of Limits (2 fixes)

Which other Frigidaire models have the MECH-LID error?

Error code MECH-LID also appears on 3 other Frigidaire models:

FFLG4033QW 3.8 cu ft Top Load with Stainless Drum (washer) · 2 fixes
FFTW4120SW 3.5 cu ft Top Load Washer with Dual Action Agitator and 700 RPM Spin Speed (washer) · 2 fixes
FFTW4120SW2 4.1 cu ft Top Load Washer (washer) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx