Frigidaire GDSP4715AF 24 in Gallery Built-In with Dual OrbitClean UO Error Fix: User Interface Control Board Error

Error code UO on the Frigidaire GDSP4715AF 24 in Gallery Built-In with Dual OrbitClean means: User Interface Control Board Error. The user interface (display/touchpad) control board has a fault or is not responding — buttons may not respond, the display may be blank or show garbled characters; try a power reset by turning off the circuit breaker for 5 minutes; if the error persists, the user interface board may need replacement; check the ribbon cable connection between the UI board and main board

The most successful fix is "Replace the User Interface Control Board" (medium difficulty, ~60 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace the User Interface Control Board") is rated medium difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Needle-nose pliers.

DIY cost: $10-$20. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Frigidaire GDSP4715AF 24 in Gallery Built-In with Dual OrbitClean has 8 other known error codes, including: CE (Communication Error Between Boards), ER (Heating Element Error), i10 (Water Fill Timeout), i20 (No Water Detected in Tub), i30 (Drain System Problem or Leak Detected), and 3 more.

Error code UO also appears on 6 other Frigidaire models: FDPC4221AS 24 in Front Control Dishwasher 50 dBA with ProDry and Delay Start, FDPC4314AS 24 in Front Control with MaxBoost Dry, FDPH4316AS 24 in Gallery Top Control 52 dBA, FDSH4501AS 24 in Top Control with EvenDry, GDPH4515AF 24 in Gallery Top Control with CleanBoost, GDPP4517AF 24 in Gallery Top Control 47 dBA with OrbitClean. The fix may vary by model, so check each model's specific page for tailored repair steps.