Frigidaire Frigidaire FGID2468UF 24 in Gallery Integrated Built-In Dishwasher with OrbitClean Wash System Er-01 Error Fix: Water Leak Detected

Error code Er-01 on the Frigidaire Frigidaire FGID2468UF 24 in Gallery Integrated Built-In Dishwasher with OrbitClean Wash System means: Water Leak Detected. The dishwasher has detected a water leak. The leak sensor in the base of the dishwasher has been activated. Check under the dishwasher for visible water. Inspect the door gasket for tears or gaps. Check the water inlet connection, drain hose connection, and internal hoses for leaks. Examine the wash pump and sump assembly for cracks. Tilt the dishwasher to drain water from the base pan and clear the leak sensor.

The most successful fix is "Replace Door Gasket and Inspect Internal Hoses for Leaks" (medium difficulty, ~60 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Yes — the top-ranked community fix ("Replace Door Gasket and Inspect Internal Hoses for Leaks") is rated medium difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Pliers, Flashlight, Bucket.

DIY cost: $15-$25. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Frigidaire Frigidaire FGID2468UF 24 in Gallery Integrated Built-In Dishwasher with OrbitClean Wash System has 8 other known error codes, including: Er-02 (Thermistor/Turbidity Sensor Failure), Er-03 (Wash Motor Failure), Er-04 (Upper Fan/Vent Failure), Er-05 (Upper Vent Failure), Er-06 (Lower Fan Failure), and 3 more.

Error code Er-01 also appears on 2 other Frigidaire models: FFCD2413US 24 in Built-In Dishwasher 60 dBA, FFCD2418US 24 in Front Control Built-In Dishwasher 48 dBA. The fix may vary by model, so check each model's specific page for tailored repair steps.