Frigidaire FFCD2418US 24 in Front Control Built-In Dishwasher 48 dBA Er-11 Error Fix: Drain Valve Failure

Error code Er-11 on the Frigidaire FFCD2418US 24 in Front Control Built-In Dishwasher 48 dBA means: Drain Valve Failure. The drain valve has failed. This is a secondary drain valve error code indicating the valve is not responding to control board commands. Check the wire harness connections to the drain valve. Test the drain valve solenoid for continuity. Inspect the valve mechanism for obstructions. Verify voltage is reaching the valve when the control board activates it. Replace the drain valve assembly if defective.

The most successful fix is "Test and Replace the Drain Valve Assembly" (medium difficulty, ~45 minutes). Estimated DIY cost: $20-$40. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Test and Replace the Drain Valve Assembly") is rated medium difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Pliers, Flashlight.

DIY cost: $20-$40. Professional repair typically costs $100-$160. Many homeowners save money by trying the top-ranked community fix first.

The Frigidaire FFCD2418US 24 in Front Control Built-In Dishwasher 48 dBA has 8 other known error codes, including: Er-01 (Water Leak Detected), Er-02 (Thermistor/Turbidity Sensor Failure), Er-03 (Wash Motor Failure), Er-04 (Upper Fan/Vent Failure), Er-05 (Upper Vent Failure), and 3 more.

Error code Er-11 also appears on 2 other Frigidaire models: FFCD2413US 24 in Built-In Dishwasher 60 dBA, Frigidaire FGID2468UF 24 in Gallery Integrated Built-In Dishwasher with OrbitClean Wash System. The fix may vary by model, so check each model's specific page for tailored repair steps.