Frigidaire FDSH4501AS 24 in Top Control with EvenDry i30 Error Fix: Drain System Problem or Leak Detected

Error code i30 on the Frigidaire FDSH4501AS 24 in Top Control with EvenDry means: Drain System Problem or Leak Detected. The drain pump is not removing water fast enough or the leak sensor in the base of the dishwasher has been triggered — the drain hose may be kinked or clogged, the drain pump may be blocked by food debris or glass, the drain connection to the disposal or drain pipe may be obstructed, or there is an actual water leak in the base; check the drain hose and clean the drain filter

The most successful fix is "Inspect and Replace the Drain Pump Assembly" (medium difficulty, ~60 minutes). Estimated DIY cost: $20-$30. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Inspect and Replace the Drain Pump Assembly") is rated medium difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Adjustable wrench, Multimeter, Flashlight.

DIY cost: $20-$30. Professional repair typically costs $130-$200. Many homeowners save money by trying the top-ranked community fix first.

The Frigidaire FDSH4501AS 24 in Top Control with EvenDry has 8 other known error codes, including: CE (Communication Error Between Boards), ER (Heating Element Error), i10 (Water Fill Timeout), i20 (No Water Detected in Tub), i40 (Flood Protection Activated), and 3 more.

Error code i30 also appears on 6 other Frigidaire models: FDPC4221AS 24 in Front Control Dishwasher 50 dBA with ProDry and Delay Start, FDPC4314AS 24 in Front Control with MaxBoost Dry, FDPH4316AS 24 in Gallery Top Control 52 dBA, GDPH4515AF 24 in Gallery Top Control with CleanBoost, GDPP4517AF 24 in Gallery Top Control 47 dBA with OrbitClean, GDSP4715AF 24 in Gallery Built-In with Dual OrbitClean. The fix may vary by model, so check each model's specific page for tailored repair steps.