Frigidaire FDPH4316AS 24 in Gallery Top Control 52 dBA i10 Error Fix: Water Fill Timeout

Error code i10 on the Frigidaire FDPH4316AS 24 in Gallery Top Control 52 dBA means: Water Fill Timeout. The dishwasher did not detect sufficient water filling within the allowed time — the water supply valve may be turned off, the inlet hose may be kinked or blocked by debris, the water inlet valve solenoid may be faulty, or the water pressure is too low; check that the water supply is fully on and the inlet hose is not kinked or clogged at the filter screen

The most successful fix is "Test and Replace Water Inlet Valve Solenoid" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Test and Replace Water Inlet Valve Solenoid") is rated medium difficulty and takes about 45 minutes. Tools needed: Phillips screwdriver, Adjustable wrench, Multimeter.

DIY cost: $15-$25. Professional repair typically costs $130-$200. Many homeowners save money by trying the top-ranked community fix first.

The Frigidaire FDPH4316AS 24 in Gallery Top Control 52 dBA has 8 other known error codes, including: CE (Communication Error Between Boards), ER (Heating Element Error), i20 (No Water Detected in Tub), i30 (Drain System Problem or Leak Detected), i40 (Flood Protection Activated), and 3 more.

Error code i10 also appears on 6 other Frigidaire models: FDPC4221AS 24 in Front Control Dishwasher 50 dBA with ProDry and Delay Start, FDPC4314AS 24 in Front Control with MaxBoost Dry, FDSH4501AS 24 in Top Control with EvenDry, GDPH4515AF 24 in Gallery Top Control with CleanBoost, GDPP4517AF 24 in Gallery Top Control 47 dBA with OrbitClean, GDSP4715AF 24 in Gallery Built-In with Dual OrbitClean. The fix may vary by model, so check each model's specific page for tailored repair steps.