Epson Epson EpiqVision Ultra LS500 4K PRO-UHD Ultra Short Throw Laser Projector with Android TV FAN-ERROR-LP Error Fix: Laser Projector Fan Failure

Error code FAN-ERROR-LP on the Epson Epson EpiqVision Ultra LS500 4K PRO-UHD Ultra Short Throw Laser Projector with Android TV means: Laser Projector Fan Failure. A cooling fan in the laser projector has failed or is running below minimum speed — the projector will shut down as laser modules require active cooling at all times; the fan assembly requires professional replacement; do not operate the projector with a failed fan as this can permanently damage the laser module

The most successful fix is "Replace Laser Projector Fan Assembly" (hard difficulty, ~75 minutes). Estimated DIY cost: $20-$40. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace Laser Projector Fan Assembly") is rated hard difficulty and takes about 75 minutes. Tools needed: T15 Torx screwdriver, Phillips #1 screwdriver, Anti-static wrist strap.

DIY cost: $20-$40. Professional repair typically costs $200-$300. Many homeowners save money by trying the top-ranked community fix first.

The Epson Epson EpiqVision Ultra LS500 4K PRO-UHD Ultra Short Throw Laser Projector with Android TV has 8 other known error codes, including: DUST-BLOBS-LP (Dust Spots in Projected Image), FAN-NOISE (Excessive Fan Noise), FILTER-CLEAN-LP (Air Filter Cleaning Required), HDMI-NO-SIG-LP (No HDMI Signal Detected), IMAGE-FOCUS-LP (Image Out of Focus), and 3 more.