🔥Oven / Range

F10

Electrolux · EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection

Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection F10 Error Fix: Runaway Temperature — Oven Overheating

The oven temperature has exceeded the maximum safe limit (typically 650°F in bake or 915°F in self-clean). The ERC (Electronic Range Control) has detected a runaway heating condition. The oven will beep and the heating elements will be shut off. First check the oven temperature sensor (RTD) — resistance should be approximately 1080-1100 ohms at room temperature (75°F). A shorted sensor reads low resistance, causing the control to think the oven is cold and continue heating. If the sensor tests good, check for a stuck/welded relay on the control board that keeps the element energized. A welded relay is a fire hazard — disconnect power immediately.

critical2 fixes available✨ Free fix available

Quick Answer

Error F10 on the Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection means: Runaway Temperature — Oven Overheating. The top-ranked community fix is “Replace Oven Temperature Sensor and Inspect Control Board Relays” (hard difficulty, ~90 min, DIY cost: $40-$60). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · oven

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many oven repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $250-$400.

Other Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection Error Codes

F11

Shorted Touchpad Key Detected

2 fixes

F13

Internal Clock Failure

2 fixes

F14

Control Board EEPROM Failure

2 fixes

F30

Open Oven Temperature Sensor (RTD)

2 fixes

F31

Shorted Oven Temperature Sensor (RTD)

2 fixes

F90

Door Lock Mechanism Failure — Cannot Lock

2 fixes

F91

Door Lock Mechanism Failure — Cannot Unlock

2 fixes

MECH-FAN

Convection Fan Motor Noise or Failure

2 fixes

People Also Ask About Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection Error F10

What does error code F10 mean on a Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection?

Error code F10 on the Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection means: Runaway Temperature — Oven Overheating. The oven temperature has exceeded the maximum safe limit (typically 650°F in bake or 915°F in self-clean). The ERC (Electronic Range Control) has detected a runaway heating condition. The oven will beep and the heating elements will be shut off. First check the oven temperature sensor (RTD) — resistance should be approximately 1080-1100 ohms at room temperature (75°F). A shorted sensor reads low resistance, causing the control to think the oven is cold and continue heating. If the sensor tests good, check for a stuck/welded relay on the control board that keeps the element energized. A welded relay is a fire hazard — disconnect power immediately.

How do I fix error code F10 on my Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection?

The most successful fix is "Replace Oven Temperature Sensor and Inspect Control Board Relays" (hard difficulty, ~90 minutes). Estimated DIY cost: $40-$60. HomeMD has 2 community-ranked fixes for this error.

Is error code F10 on a Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection serious?

This error is rated critical severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Can I fix Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection error F10 myself?

Yes — the top-ranked community fix ("Replace Oven Temperature Sensor and Inspect Control Board Relays") is rated hard difficulty and takes about 90 minutes. Tools needed: Phillips screwdriver, Multimeter.

How much does it cost to repair Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection error F10?

DIY cost: $40-$60. Professional repair typically costs $250-$400. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection have?

The Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection has 8 other known error codes, including: F11 (Shorted Touchpad Key Detected), F13 (Internal Clock Failure), F14 (Control Board EEPROM Failure), F30 (Open Oven Temperature Sensor (RTD)), F31 (Shorted Oven Temperature Sensor (RTD)), and 3 more.

What other error codes does the Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection have?

The Electrolux EI30EF45QS 30 in 5.1 cu ft Built-In Electric Wall Oven with True European Convection has 8 other known error codes:

F11 — Shorted Touchpad Key Detected (2 fixes)
F13 — Internal Clock Failure (2 fixes)
F14 — Control Board EEPROM Failure (2 fixes)
F30 — Open Oven Temperature Sensor (RTD) (2 fixes)
F31 — Shorted Oven Temperature Sensor (RTD) (2 fixes)
F90 — Door Lock Mechanism Failure — Cannot Lock (2 fixes)
F91 — Door Lock Mechanism Failure — Cannot Unlock (2 fixes)
MECH-FAN — Convection Fan Motor Noise or Failure (2 fixes)

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx