EGO ST1521S PowerLoad Trimmer 15 in 56V Cordless String Trimmer with Automatic Line Feed POWERLOAD-FAIL Error Fix: POWERLOAD Auto-Wind Not Working

Error code POWERLOAD-FAIL on the EGO ST1521S PowerLoad Trimmer 15 in 56V Cordless String Trimmer with Automatic Line Feed means: POWERLOAD Auto-Wind Not Working. The POWERLOAD system does not wind the line automatically when activated — ensure the line is the correct diameter and length, thread the line through the eyelet correctly before pressing the POWERLOAD button, and verify the spool is properly seated; if the winding motor spins but does not pull the line, the POWERLOAD mechanism clutch may need service

The most successful fix is "Service or Replace the POWERLOAD Clutch Mechanism" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Service or Replace the POWERLOAD Clutch Mechanism") is rated medium difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Flathead screwdriver, Compressed air can, Small brush.

DIY cost: $15-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

The EGO ST1521S PowerLoad Trimmer 15 in 56V Cordless String Trimmer with Automatic Line Feed has 8 other known error codes, including: BAT-1-FLASH (Battery Single LED Flashing), BAT-COLD (Battery Too Cold to Operate), BAT-HOT (Battery Overtemperature Protection), BAT-LEDS-OFF (Battery LEDs Not Lighting Up), BAT-NOT-RECOGNIZED (Battery Not Recognized by Tool), and 3 more.