Dacor DP36M96NDS Pro 36" Dual Fuel MECH-IGNITER Error Fix: Gas Oven Igniter Weakened or Failed

Error code MECH-IGNITER on the Dacor DP36M96NDS Pro 36" Dual Fuel means: Gas Oven Igniter Weakened or Failed. The oven burner clicks but does not ignite, or takes an excessively long time to light (more than 90 seconds). The hot surface igniter (glow bar) must draw enough current (typically 3.2+ amps) to open the gas valve safety circuit. As igniters age, they weaken and cannot draw sufficient current. A weak igniter will glow orange but the gas valve will not open. Measure the igniter current draw with a clamp meter — if below 3.0 amps, replace the igniter. The igniter is fragile (silicon carbide) — do not touch with bare hands.

The most successful fix is "Replace the Oven Hot Surface Igniter" (hard difficulty, ~45 minutes). Estimated DIY cost: $50-$80. HomeMD has 2 community-ranked fixes for this error.

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Yes — the top-ranked community fix ("Replace the Oven Hot Surface Igniter") is rated hard difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Clamp meter, Gloves.

DIY cost: $50-$80. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Dacor DP36M96NDS Pro 36" Dual Fuel has 8 other known error codes, including: F0 (Function Key Stuck), F1 (System Watchdog Circuit Fault), F2 (Heating Mode Over-Temperature), F3 (Shorted Oven Temperature Sensor (RTD)), F4 (Open Oven Temperature Sensor (RTD)), and 3 more.

Error code MECH-IGNITER also appears on 2 other Dacor models: DOP48M96DPS 48 in 6 Burner 5.5 cu ft 18,000 BTU Modernist Dual Fuel Range, ER30DSCH Distinctive Dual-Fuel Range. The fix may vary by model, so check each model's specific page for tailored repair steps.