Bosch WGA244AMUS 2.4 cu ft 500 Series Washer White F:16 Error Fix: Door Not Properly Closed

Error code F:16 on the Bosch WGA244AMUS 2.4 cu ft 500 Series Washer White means: Door Not Properly Closed. The door has not been detected as fully closed. Check that the door is pushed firmly shut until it clicks. Inspect the door hinge for sagging or misalignment. Check the door striker (catch) for damage or misalignment with the lock mechanism. On some models, a worn door boot seal (gasket) can prevent the door from fully engaging the latch. Verify the door switch is functioning — test for continuity when the door is pressed closed.

The most successful fix is "Replace Door Lock Assembly and Inspect Door Seal" (medium difficulty, ~45 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

This error is rated low severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Replace Door Lock Assembly and Inspect Door Seal") is rated medium difficulty and takes about 45 minutes. Tools needed: Flat blade screwdriver, Phillips screwdriver.

DIY cost: $10-$20. Professional repair typically costs $150-$220. Many homeowners save money by trying the top-ranked community fix first.

The Bosch WGA244AMUS 2.4 cu ft 500 Series Washer White has 8 other known error codes, including: E02 (Motor / Inverter Fault), E13 (Water Inlet Timeout), E17 (Overfill Condition), E18 (Drain Timeout), E23 (AquaStop / Leak Detected), and 3 more.

Error code F:16 also appears on 4 other Bosch models: WGA242ABUS 2.4 cu ft 500 Series Compact Front-Load Washer, WGA244ABUS 2.4 cu ft 500 Series Compact Washer, WGA252ABUS 2.4 cu ft 500 Series with Home Connect, WGG244ABUS 2.4 cu ft 500 Series Smart Washer. The fix may vary by model, so check each model's specific page for tailored repair steps.